0086 13435564100

No Scratch

Color never fall



How to choose a water-saving, silent,matt color back to wall toilet?

Release time:2016-02-22    Hits:    【Print

Want to choose a water-saving, silent, non stick wall toilet, how should we choose?

Q1: does the way the toilet flushes affect the water consumption?

Of course! And toilet peculiar smell also has relation with flush way! (I mean, this is the key

Toilets can be divided into four types according to the way of flushing: direct flushing, siphon, jet siphon and vortex siphon.

The direct impact type uses the compressed air in the water tank to form a strong thrust, and uses the gravity acceleration to force the sewage when the water falls.


Water saving index:

This kind of sewage is simple and rough, with strong sewage discharge capacity, but it is noisy, with unsatisfactory odor separation effect and poor quality, which may lead to odor return.

Applicable to family needs: high pollution discharge requirements and high water-saving requirements.

In order to solve the problem of noise and smell of direct flush toilet, siphon toilet came out.

Siphon toilet depends on suction. When the S-shaped drain pipe is full of water, the water level difference will form suction to drain. The drainage sound is small and the water seal is high, so there is no need to worry about the impact of noise and odor, but the water consumption is high and it is easy to splash. Due to the small diameter of drainage pipe, it is generally about 5-6cm, easy to block.

Water saving index:


Applicable family: poor sound insulation of toilet and limited budget of toilet.

The jet siphon is an improved version of the siphon type, which adds a jet accessory channel facing the center of the toilet sewage pipe. The flushing is thorough, which combines the advantages of direct flushing and siphon, but the water-saving effect is not as obvious as that of direct flushing, which is relatively silent and will not backfire after flushing.

Water saving index:

Applicable family: poor sound insulation in toilet, high requirements for odor and splash proof effect.

Whirlpool siphon is the first choice of big brands. It adds a water outlet on the other side of the jet siphon toilet. When flushing, the water flow forms a whirlpool on the inner wall to discharge the dirt in the toilet.

Water saving index:

Applicable to family needs: families who are afraid of toilet blocking and have sufficient budget.

Q2: toilet I also want to see beauty!


According to the structure of the toilet can be divided into split type, connected type, hanging wall type and no water tank type.

Split type: direct flush type is generally adopted, with large volume. There are some clean dead angles between the water tank and the base, which is difficult to be managed.

One piece type: siphon type drainage is generally adopted, water tank and toilet are integrated, seamless gap is easy to clean.

Wall mounted: the water tank of the wall mounted toilet is hidden in the "false wall". The wall hung toilet with a higher appearance has become popular all the way. Shall I use it?

No water box type: the toilet without water tank is directly connected to the water pipe. The flushing uses the principle of fluid mechanics, which is more water-saving, but it has certain requirements for water pressure and higher price.

Q3: if it doesn't go down, it still sticks to the wall


After a good time, easily press the wash button. I thought it was a bright and clean scene, but there were always one or two "nail households" making trouble. A few more rushes will not help.

There are two reasons for this problem

1. You are wet and need to be recuperated

2. There's something wrong with the glaze of your toilet.

The main culprit of pollution hanging is poor glaze. When you buy it, you can ask the shopkeeper whether the drain outlet is glazed. You can reach into the drain outlet and feel whether there is glaze in the back water bay. The qualified glaze must be delicate.

Q3: how does water splash PP break?

When pulling Baba, the water will splash to the butt, and there will be a sense of melancholy in my heart! Is there any good way to solve it?

Did you punch your question?

There are two reasons for this problem

1. There is a certain relationship between the inner diameter of the seat ring and the inner diameter of the seat ring. The inner diameter of the seat ring is small, and the splashed water will naturally contact the butt in a large area. The seat ring with a relatively large inner diameter should be selected when selecting the toilet.

2. The height of water seal is high. The basic requirement of water seal is to seal the drain outlet, otherwise the odor will be emitted from the drain pipe. Reasonably speaking, splashing cannot be avoided completely, but it can be improved. If you want the toilet not to splash, you should pay attention to the water seal height of the toilet.

Someone will ask, then my toilet has been installed, there is no solution? Or how to deal with such problems in other public places?

Hardware can't change, so start with software and put a piece of paper in the toilet in advance.

If you feel that one piece of paper has not enough resistance in today's "very good condition", then 2 pieces! No more, no more!

Q4: how to save water?

Every toilet, no matter what brand it is, will have two buttons of different sizes on the water tank.

These two buttons represent the functions of full water and half water drainage respectively. Tell me, does anyone have to press two buttons each time they go to the toilet, no matter how big or small

The small button is half water state. When you press it, only half or one third of the water in the water tank will be discharged. The big button is full of water. When it is pressed, all the water stored in the water tank can be discharged at one time. The water power is larger, and the flushing will be cleaner.

So, it's no big deal. Don't press the two buttons together! One third of the water can clean the toilet. You have to use the whole tank of water. Then I can't save water for you!